PLA filament (1.75 mm or 2.85 mm) is made in Europe for 3D printers using FFF/FDM technology.

PLA is a biodegradable plastic obtained from natural resources, from starch extracted from corn, beet and wheat. It is made with a raw material and process that not only match the properties of PLA850 but surpass it in some respects.

Features:

-Diameter 1.75 mm.
-1000 gram spool.

General printing parameters:
-Nozzle temperature (between 190ºC and 230ºC)
-Bed temperature (between 50ºC and 70ºC)
-Ventilador: ON (100) %

Propiedades físicas:
-Densidad: 1.24 g/cm3
-Melt flow rate: 8 g/10 min (ISO 1133-A)
-Melt flow rate: 3 g/10 min (ISO 1133-A)
-Stereochemical purity: 96 (% L-isomer)
-Monómero residual: 0.3% (max)
-Humedad (Coulométrico Karl Fisher): 400 (max) ppm
-Melting temperature: 155º C Tm (DSC)
-Glass transition temperature: 55-60º C Tg (DSC)

Propiedades mecánicas:
-Tensile modulus: 3500 MPa (ISO 527-1)
-Tensile strength: 45 MPa (ISO 527-1)
-Tensión al rendimiento: 5% (max) (ISO 527-1)
-Charpy notched impact 23º C: ≤5 kJ/m2 (ISO 179-1eA)