Our PETG filament (1.75mm or 2.85mm) is a filament manufactured in Spain for
3D printers with FFF/FDM technology.

PETG is polyethylene terephthalate, with a modifier (Glycol-modified), which makes a change in the chemical structure that makes it more transparent, less fragile and easier to
print.

Our PETG improves on ABS in being resistant and easier to print with the
peculiarity of melting at a higher temperature. Compared to PLA, it is more resistant in
temperature and physical properties, making its impression more complex.

PETG is characterized by having very good mechanical properties. Has
more elasticity, is more resistant to impacts, has more adhesion between layers and is more resistant to temperature compared to PLA.

Características:
-Diámetro de 1.75mm.
-Bobina de 1000 gramos.

Parámetros de impresión generales:
-Temperatura del nozzle (entre 240ºC y 260ºC)
-Temperatura de la cama (entre 70ºC y 100ºC)
Propiedades físicas:
-Viscosidad intrínseca: 0.84 ± 0.02 dl/g (ISO 1628-5)
-Color b*: ≤ 1 (ASTM D6290)
-Color L*: ≥ 64 (ASTM D6290)
-Temperatura de transición del vidrio: 8º C (ºASTM D3418)
-Densidad a granel: 0,72 g/cm3
-Densidad específica 1,23 g/cm3
-Humedad: ≤ 0.3%
-Tamaño de partícula: 320 ± 50 mg/20 chips
-Forma de pellets: Cilíndrica