PLA TOUGH filament (1.75mm or 2.85mm) is a filament manufactured in Europe for 3D printers with FFF/FDM technology.

PLA TOUGH is an advanced material designed to achieve high impact resistance and strength similar to ABS, combining the rigidity and ease of printing of PLA. Even for large parts.

Features:

-1.75mm diameter.

-1000 gram spool.

General printing parameters:

-Nozzle temperature (between 200ºC and 220ºC)

-Bed temperature (between 50ºC and 70ºC)

-Fan: ON (100) %

Physical properties:

-Density: 1.21 g/cm3

-Flow rate: 8 g/10 min (ISO 1133-A)

-Melting temperature: 150-160º C Tm (DSC)

-Glass transition temperature: 60-65º C Tg (DSC)

Mechanical properties:

-Tensile modulus: 2780 MPa (ISO 527-1)

-Tensile strength: 47 MPa (ISO 527-1)

-Yield strain: 3% (max) (ISO 1133-A) 527-1)

-Charpy notched impact 23º C: 30 kJ/m2 (ISO 179-1eA)

Sample 3D printed figure not included.