PLA filament (1.75mm or 2.85mm) is a filament manufactured in Europe for 3D printers with FFF/FDM technology.

PLA is a biodegradable plastic obtained from natural resources from starch extracted from corn, beets and wheat. It is made with a raw material and a process that not only manages to match PLA850 in properties, but surpasses it in some aspects.

Characteristics:

-Diameter of 1.75mm.

-1000 gram coil.

General printing parameters:

-Nozzle temperature (between 190ºC and 230ºC)

-Bed temperature (between 50ºC and 70ºC)

-Fan: ON (100) %

Physical properties:

-Density: 1.24 g/cm3

-Flow rate: 8 g/10 min (ISO 1133-A)

-Flow rate: 3 g/10 min (ISO 1133-A)

-Stereochemical purity: 96 (% L-isomer)

-Residual monomer: 0.3% (max)

-Humidity (Karl Fisher Coulometric): 400 (max) ppm

-Melting temperature: 155º C Tm (DSC)

-Glass transition temperature: 55-60º C Tg (DSC)

Mechanical properties:

-Tensile modulus: 3500 MPa (ISO 527-1)

-Tensile strength: 45 MPa (ISO 527-1)

-Yield stress: 5% (max) (ISO 527-1)

-Charpy notched impact 23º C: ≤5 kJ/m2 (ISO 179-1eA)

Sample 3D printed figure not included.